Answers to common questions about ZENTVO tank systems—covering selection, sizing, materials, installation, and project documentation.
ZENTVO recommends the best tank system based on water type, application, site conditions, and required standards. For potable water, GRP/FRP and stainless steel tanks are commonly used. For fire reserve and industrial uses, selection depends on corrosion risk, local codes, and site constraints.
Common applications include:
Yes—if the project is potable water, please confirm water type, local requirements, and documentation needs. ZENTVO can recommend a suitable system and provide relevant documentation as required.
Request potable water documentationTypical decision factors include:
Yes. The correct configuration depends on temperature range, wind exposure, and site conditions. ZENTVO can recommend suitable configurations and options as required.
It depends on water chemistry and project requirements. Provide details (water type, conductivity/concentration, temperature), and ZENTVO will recommend an appropriate solution.
Submit your water specificationsFirst confirm the required capacity. Then ZENTVO engineers propose several cost-effective dimensions. You can choose the best option based on available footprint and height limit.
Yes. Provide footprint, height limit, access constraints, and clearance needs. ZENTVO will optimize the layout for installation and maintenance.
Submit site dimensions for a custom layoutTell us early. ZENTVO can optimize dimensions and configuration to reduce installation difficulty while meeting capacity requirements.
If you require separated storage or redundancy, inform ZENTVO. Compartment configuration depends on the tank system and project scope.
Many modular systems can be planned for future expansion. Mention future planning during requirement review so the initial layout can support it.
Yes. ZENTVO engineers provide project-specific CAD/GA drawings to confirm dimensions, connections, and configuration before production.
ZENTVO issues drawings for review and confirmation. Manufacturing proceeds only after key details are approved:
Depending on project requirements and confirmed scope, ZENTVO can provide:
Yes. Share your checklist with ZENTVO. We will support applicable documents based on configuration and scope.
Send us your submittal checklistThe most common inputs needed are:
ZENTVO recommends the best tank system based on water type, application, site conditions, and required standards. For potable water, GRP/FRP and stainless steel tanks are commonly used. For fire reserve and industrial uses, selection depends on corrosion risk, local codes, and site constraints.
Common applications include:
Yes—if the project is potable water, please confirm water type, local requirements, and documentation needs. ZENTVO can recommend a suitable system and provide relevant documentation as required.
Request potable water documentationTypical decision factors include:
Yes. The correct configuration depends on temperature range, wind exposure, and site conditions. ZENTVO can recommend suitable configurations and options as required.
It depends on water chemistry and project requirements. Provide details (water type, conductivity/concentration, temperature), and ZENTVO will recommend an appropriate solution.
Submit your water specificationsFirst confirm the required capacity. Then ZENTVO engineers propose several cost-effective dimensions. You can choose the best option based on available footprint and height limit.
Yes. Provide footprint, height limit, access constraints, and clearance needs. ZENTVO will optimize the layout for installation and maintenance.
Submit site dimensions for a custom layoutTell us early. ZENTVO can optimize dimensions and configuration to reduce installation difficulty while meeting capacity requirements.
If you require separated storage or redundancy, inform ZENTVO. Compartment configuration depends on the tank system and project scope.
Many modular systems can be planned for future expansion. Mention future planning during requirement review so the initial layout can support it.
Yes. ZENTVO engineers provide project-specific CAD/GA drawings to confirm dimensions, connections, and configuration before production.
ZENTVO issues drawings for review and confirmation. Manufacturing proceeds only after key details are approved:
Depending on project requirements and confirmed scope, ZENTVO can provide:
Yes. Share your checklist with ZENTVO. We will support applicable documents based on configuration and scope.
Send us your submittal checklistThe most common inputs needed are:
ZENTVO supports common standards such as British Standard (BS) and American Standard (ANSI). Please confirm:
A typical tank includes four main connections:
Yes. ZENTVO confirms flange locations on CAD/GA drawings before production to avoid mismatch.
It depends on the quotation scope. In many projects, the customer prepares the concrete foundation, while ZENTVO supplies panels and standard installation components based on the confirmed configuration.
Standard items (depending on configuration):
Optional items may include ladders, water level indicator, and additional fittings.
ZENTVO controls quality through a four-stage process:
Yes. If third-party inspection is required, please inform ZENTVO during ordering so we can coordinate based on timeline and scope.
Where applicable, ZENTVO can support photo/video records and packing information to help customers with receiving and site preparation.
ZENTVO uses export packing methods to reduce transport damage. Panels are commonly packed in reinforced frames to protect corners and reduce handling impact during sea shipping and loading/unloading.
Common documents include packing list and shipping documentation based on delivery terms and destination requirements.
ZENTVO can quote under common Incoterms based on destination and project needs:
For each project, ZENTVO provides installation guidance, which may include:
Typical site preparations include:
Follow these key steps to ensure a smooth installation:
ZENTVO can provide guidance materials and remote support. The training approach can be discussed and agreed upon depending on project scope and requirements.
Discuss training options with our teamTypical post-installation checks include:
Maintenance depends on application and configuration. Typical tasks include:
Yes. If spare parts are required, inform ZENTVO during ordering so we can prepare recommended spares and accessory lists for your configuration.
Enquire about spare partsYes. ZENTVO provides a warranty statement based on the confirmed order and configuration. Terms may vary by system type and scope.
Request warranty informationContact our team via email with the following information for the fastest response:
Providing the following details enables quicker diagnosis and more effective support from our team:
A ZENTVO quotation typically states:
Yes. ZENTVO can customize based on your site and project requirements, including:
Email us with your project details or use the Engineering Input Checklist below to ensure we have everything needed to respond quickly and accurately.
What ZENTVO can deliver to support specification, approval, and execution — as required per project scope.
Verify the following flange details and compare against approved drawings:
Check the following before contacting support:
If leakage continues, send photos / video and mark the leakage location clearly.
Common causes include:
Verify base levelness first and follow the installation sequence. Send a short site video if further guidance is needed.
Send photos / video and connection layout — ZENTVO will perform a quick diagnosis.
Use this checklist to reduce revisions and speed up drawings and quotation. Share with your inquiry to info@zentvo.com.